7.5 Log Continuous
Figure 7.22: Log Continuously Threshold
A threshold of 0 will allow all readings to be recorded.
The threshold indicator will turn green if the threshold of the triggered reading is met (recording) and red if the
triggered reading is below the threshold (no recording).
The threshold value is saved in the registry configuration file when it is changed. Changes can only be made while not
recording.
An override from the command line options (-LCTH,x) can be made. The override will only take effect for the current
session and will not alter the saved configuration.
Annotation settings
While the “Log Continuous” mode is recording data, annotations can be made to the log file records
with hotkeys. The Annotation tab allows the definition of hotkeys and their associated annotation text that will appear
at the end of an annotated record.
Figure 7.23: Log Continuously Annotation tab
Persistent annotation
The “Persistent” mode makes the annotated text persistently appear at the end of each logged
record after the first time the hotkey is pressed.
Without “Persistent” checked, annotation text is only appended to a record when the hotkey is pressed, and other
records have no annotation text.
Synchronized annotation
The “Synchronized” mode postpones annotation requests until the next scheduled record so
that the annotated text is synchronized with scheduled triggered recordings.
Without “Synchronized” checked, the hotkey will immediately trigger a record log, and the associated annotation text
will be appended to that triggered record.
GPS
UDM will read the data produced from an externally connected USB or serial GPS receiver.
Unihedron SQM-LU Operator’s Manual -
20170728
31
Содержание SQM-LU
Страница 2: ......