![background image](http://html2.mh-extra.com/html/unigas/tlx92r/tlx92r_manual-of-installation-use-maintenance_3851870036.webp)
PART IV: MAINTENANCE
36
MultiBloc VD-V VD-R Mounting
Siemens SKP15 e SKP25
Mounting
Removing the combustion head
Remove the cover
C
.
remove the electrodes cables;
unscrew the 3 screws
V
which hold in position the gas manifold
G
and pull out the complete group as shown in the picture below.
Clean the combustion head by a compressed air blow or, in case of scale, scrape it off by a scratchbrush.
Note:
to replace the combustion head reverse the procedure described above having care to place correctly the O ring (
OR
) between
burner and gas manifold.
Attention: before adjusting the combustion head, turn the burner off and wait until it gets cold.
position
to push
1
2
3
4
5
6
7
1. Position VD on VB, fig. 2+3.
2. Slide VD forward up to the stop, fig. 4.
3. Screw VD on with 2 M5 screws for each, max. 5 Nm/44 in.-lb., fig. 5/6.
4. VD can be mounted rotated by 180°, fig. 7.
VB
VD
SKP15.001
SKP25.003
AIR
To replace the actuators, turn the screws
as shown in the drawing.
Содержание TLX92R
Страница 44: ...PART IV MAINTENANCE 43...
Страница 45: ...LME73 000Ax PME73 831AxBC LME73 831AxBC Service instruction manual M12921CB Rel 1 2 02 2016...
Страница 67: ...23...
Страница 68: ...Note Specifications and data subject to change Errors and omissions excepted...