Installation
7
Required Tools etc.
• Screwdrivers
• Cutting pliers
• Multimeter
• Screws and wall plugs for wall mounting.
Make sure the screws and wall plugs have the correct length for the type of wall used.
Mounting
1. First, make an outline of how the units are to be placed.
If several Battery Pack Chargers (or Charging Racks) are to be mounted close to each other,
mount them so that there is enough space between them to be able to disconnect the batteries
or the handsets (vertical distance) and to be able to open the top cover (horizontal distance).
When you are planning the location of the units, start to mount them in a height that makes it
easy to reach the batteries.
2. Measure and mark the drill holes by using the dimensions in <Blue>Figure 2.
3. Drill and fasten the unit to the wall with four screws.
Figure 2
Mounting dimensions in mm - Charging Rack seen from back
Remove the Top Cover
Remove the top cover by first pressing on the sides of the top cover, then lifting it upwards.
Wall material
Plug length
Screw diameter
Single plasterboard
Thorsman TP1
3.5 – 5 mm
Double plasterboard
Thorsman TP2
3.5 – 5 mm
Concrete
Thorsman TP2
3.5 – 5 mm
400
290
70.5
