OpenScape Voice Functions
29
Voice calling
From your phone, you can directly call any team member whose telephone has
a loudspeaker.
Voice calling with variable input of member number
^
Lift the handset.
j
Enter the code for voice calling (see code table
Page 31) followed by the one
or two-digit member number of the respective team member.
Z
As soon as the connection has been established, you will hear a confirmation
tone and can speak to the other party via the loudspeaker.
]
To end the call, simply hang up.
Voice calling to a saved member number
Prerequisite
: The code for voice calling and the member number are pro-
grammed on a sensor key.
S
Press the programmed sensor key. A connection to that member's loudspeaker
will immediately be established: You can speak to the destination caller via your
speakerphone.
Announcing the local phone number
You can use this function in order, for example, to identify the phone number of
a phone in a conference room if it is not indicated on the display.
^
Lift the handset.
j
Enter the code for "Announcing the local phone number" (see code table
Page 31). The phone number is announced.
]
Then hang up.
Dialling the last caller
You can retrieve and dial the phone number of the last answered or dialled caller.
Retrieving and dialling the last answered caller
The following phone numbers can be saved for retrieval:
• The last answered call
• The last missed call
• The last picked up call (group call)
^
Lift the handset.
j
Enter the code for dialling the last answered caller (see code table
Page 31).
The phone number is dialled and the connection is established.
