26
OpenScape Voice Functions
Call forwarding unconditional
With
Call forwarding unconditional
(CFV), all incoming calls are forwarded to
a different destination.
You can use the feature code to activate/deactivate this function and define a
forwarding destination.
Activating
n
Lift the handset.
o
Enter the code (see the table of codes
Page 31) and the number of the phone
where you want to forward the calls.
Z
You hear a confirmation tone.
If the "Courtesy call" function is active, the OpenScape Voice dials the phone to
which you forwarded your calls.
• If the party at this phone answers, you can inform him or her that your calls are
being forwarded to his or her phone.
• If the forwarded-to party does not answer or is busy, repeat the activation pro-
cedure. As long as you do so within two minutes, you hear the confirmation
tone followed by dial tone. The OpenScape Voice does not attempt to alert the
party at the forwarding destination that the feature has been reactivated.
While
unconditional call forwarding
is activated, calls forwarded while the line
is in idle state are signaled by a brief ring on the phone to which they are for-
warded (approx. 0.5 seconds). This serves as a reminder that this particular fea-
ture is activated.
Deactivating
^
Lift the handset.
j
Enter the code (see the table of codes
Page 31). You receive a confirmation
tone.
Making anonymous calls
Your administrator decides whether or not your caller ID (name and phone num-
ber) is displayed on a called party’s station.
Anonymous
calling is when your
data is not transmitted. The settings configured can be deactivated, however, for
specific calls.
Deactivating
If your administrator permanently activated
anonymous calling
for your phone,
you can deactivate this setting as follows:
^
Lift the handset.
j
Enter the code (see the table of codes
Page 31) to transmit the caller infor-
mation.
Z
You hear a confirmation tone.
• If your caller ID is transmitted: your caller ID is displayed.
• If your caller ID is suppressed: "unknown" is displayed.
