Conducting calls – with multiple users
61
Conducting calls – with multiple users
Call waiting
You need to speak to a user in your communication system urgently, even
though his line is busy. You can send a call waiting signal during his call to let
him know you want to talk to him. The user either answers immediately or you
will be automatically connected to him when he has finished his call.
This function is only available if it has been configured by the service engineer.
The user is busy. You want to use call waiting.
> <
[
Select the menu item, confirm and wait briefly.
You receive a call waiting signal (second call)
You are still available to other callers, even though you are on the telephone.
During a call the call waiting feature informs you about a second call. You can
answer this second call during the call.
p
You are on a call and hear a call waiting signal.
If you want to answer the second call, you can either place the first call on hold
(the first caller waits) or end the first call.
Placing the first call on hold and answering the second call
Answer the second call.
Talk to the second caller. The first caller waits. His call is on hold. You can now:
• Toggle between the two callers (
Page 63) or
• Set up a conference
Page 63.
Ending the second call
a
Press the On-hook key. Your handset rings.
c
Press the Talk key to talk to the first caller again.
Ending the first call.
a
Press the On-hook key. The first call is ended. Your handset rings.
c
Press the Talk key and answer the second call.
CAMP-ON
Note:
To camp on, you must have the appropriate class of service.
Camp-on is not possible if the called party is protected by the camp-on se-
curity function.
Pickup