64 Bays SAS to SAS/SATA JBOD Subsystem
32
User Manual
11.
With at least 4 persons carrying the enclosure, insert the 2 inner rails (attached
to the sides of the enclosure) into the middle rails. Slide the enclosure until it
stops or about half way through.
NOTE: Be careful when inserting the 2 inner rails into the middle
rails. The 2 inner rails must be parallel with the 2 middle rails so
that 2 inner rails will insert and slide easily. Use hands to guide
the inner rails when inserted into the middle rails.
Inner Rail Aligned with and Inserted into the Middle Rail
Important: Make sure to hold the enclosure firmly in level position
while inserting the enclosure in the rail. Keep holding the
enclosure moved inside the rack. When the half rear side is inside
the rack, you can put down the two rear handles but support in the
bottom part of the enclosure is still needed so that the enclosure
will not drop down.
Middle Rail
Inner
Rail
