MSR110D Programmer’s Manual UDN PM008 Rev. D
Section 1 -- General Description 20-Dec-2001
Page
3
Uniform Industrial Corp.
Proprietary and Confidential
Total
44 pages
Step 1. Switch S1-1 on and power on the source reader.
Step 2. Connect the source and target reader.
Step 3. Switch S1-1 on and power on the target reader.
Step 4. The target reader orange LED goes flashing and source reader LED goes red as soon as start copy.
Step 5. When copy finished, the target reader LED remains orange still, and the source reader LED goes green and
beeps three times. If user wants to copy another reader, repeat Step 2.
Step 6. Switch all readers’ S1-1 off.
Transmitting Data Block of Tracks
Each track could divide into 1-3 channels (blocks) for transmission. For example, user could set “Channel A” of
track1 format as: ISO standard card track1 15
th
-30
th
characters. If the set data is different from the data after
swiping, the reader will transmit completed data without limitation. The commands of setting channels are shown
in section 5.
