Cautions
R
F
ID
Stay arm
Users can Stay Arm alarm panel when at home.
Enter
【
*+pa Stay Arm button
】
→
4-digits password, the default
password is 1111.
You will hear one long Beep, then keypad will transmit stay arm signal to
alarm panel for one second.
Notice: if you hear two Beep Beep, it means wrong password.
When panel receive the stay arm signal, its built-in siren would make a
sound and its stay arm indicator light on.(depend on alarm panel)
Then the alarm panel enter stay arm status.(depend on alarm panel)
Sensors set in the home mode zones would be at disarm status, so that
families can leisurely stay at home and won’t trigger alarm. And sensors
in other zones would be at arm status to defend intruders.
Doorbell
When the keypad under normal work status, users can press
button, and then the keypad will send doorbell signal to the panel.
[doorbell]
When the panel receive the doorbell signal, it will make
sounds.(depend on alarm panel)
“dingdong”
Precautions
Users need to follow below items in order to make the keypad have longer
working life, and also to prevent injury to users and others during
operation.
General instructions
Keypad should coding with panel before usage
It may affect the wireless signal transmission distance when
keypad under low voltage
Keypad powered by 3pcs AAA battery
Please take out the insulation tape inside battery compartment
before operate keypad
Regular routine inspection, timely remove malfunction, avoid
system failure at critical moment
Keypad do not support waterproof and moisture proof function,
keypad should be installed at cool and dry place.
Keypad shell is made from ABS material. Do not exposure keypad
long time, otherwise keypad working time would be shorter.
Forbidden
Keypad is non-explosion-proof product; please do not install it at
where there is combustible and explosive.
Please do not install the keypad near electromagnetic object and the
object which would generate thermal energy such as heaters,
air-condition and microwave.
Decomposition Forbidden
Do not disassemble keypad when users discard it.
Only professionals can disassemble this keypad.
Maintenance
13
14
Users can use soft cloth or paper towels to clean the keypad if there is dust
and marks on its surface.
If there is dirt on keypad, users can use soft cloth with alkaline cleaning
fluid to clean it. Users need to dry the keypad after cleaning.
