As a kind of accessory in alarm system, keypad is a terminal control tool
and it can replace remote controllers. Users need input users’ password
or Administrator password to use keypad control panel.
Keypad usage
Away arm
When the panel receive the arm signal, its built-in siren will make a sound
and its away arm indicator light on, all alarm zones in the alarm panel
enter the arm status(depend on the alarm panel).
If there is alarm happen, then the panel will make alarm sounds and
automatically send SMS and make call to the users whose phone
numbers have preset in the panel.(depend on the alarm panel)
Disarm
Users can disarm via RFID tag and keypad.
Keypad disarm
Enter
【
*+password + Disarm button
】
→
4-digits password, the
default password is 1111.
You will hear one long Beep, then keypad will transmit disarm signal
to alarm panel for one second.
if you hear two Beep Beep, it means wrong password.
Notice:
When the panel receive disarm signal, it will make two sounds, its arm
indicator light off, and its disarm indicator light on.(depend on the alarm
panel)
All alarm zones would enter disarm status, accessories won’t trigger
alarm.(depend on panel)
Swipe RFID tag to disarm
Press * button
，
keypad light, swipe tag twice, you will hear two Beep
Beep. Then it will send disarm signal to alarm panel.
R
F
ID
11
12
Users need to Away Arm alarm panel when go out of home.
Users can arm the panel at home if the keypad set to have delay arm
function. And users need to leave home before delayed time arrives.
Enter
【 *+
password + Away Arm button
】
→
4-digits password, the
default password is 1111.
You will hear one long Beep, then keypad will transmit away arm
signal to alarm panel for one second.
if you hear two Beep Beep, it means wrong password.
Notice:
