3
1
ITEM
NO.
PART
NUMBER
DESCRIPTION
QTY
1
PT81000A
BASE MOUNT
1
2
PT81000B
MOUNT PLATE
1
3
PT81000C
CORD GUARD
1
4
PT81000D
STUDDED ADJUSTMENT PLATE
1
5
PT81000E
PERFORATED ADJUSTMENT PLATE
1
6
PT81000F
TENSION KNOB
1
7
14” ZIP TIE
2
8
M4 X 0.7 X 8 PAN HEAD MACHINE
SCREW, PHILLIPS, ZINC, STEEL
8
8
2
4
5
6
7
Wall/Flat Mount Assembly Instructions
Please be sure your mount kit has the following parts:
Place the PC face down on a
protected/padded surface.
Tabs
Run cables through the
cut-outs in the Mount Plate
before installing Cord Guard.
Place the Cord Guard over the
cords and align with the holes
on the Mount Plate.
Secure the Cord Guard by
installing two screws on the
back side of the Mount Plate.
Screws
Lower the PC flat against the
Mount Plate.
Install two screws on the
front through the access
holes in the Cord Guard. A
magnetic tip screwdriver may
be helpful.
Place the Mount Plate as you see
above. Be sure the TABS are pointed
up. Install screws in the 4 positions
noted.
Begin with the Base Mount
securely fastened to the wall.
(fasteners not included)
Lift the PC/Mount Plate as
shown. Insert the TABS into
the slots at the top of the
Base Mount attached to the
wall.
Once both TABS are fully
inserted, lower the PC at an
angle. For safety, do not
leave the PC “hanging” on
the Mount Plate TABS.
Wall
2
