UniFlow NTware MiCard, Инструкция по эксплуатации

Страница: 15 / 22

MiCard Magnetic Card Reader
3
By clicking on in the ID-Device column, a new window will open showing you the
advanced options.
The terms used and the possible settings of the configuration window are as follows:
•
Connected ID Module:
Shows the ID Module connected, e.g. MiCard/miniMIND.
•
Last Read ID:
Shows the last ID read by a card swipe.
•
Conversion Result:
Shows the result of the last read ID when the configured code conversions are
applied. This is the ID sent to the server for authentication.
•
Code Remove First:
Specifies the number of characters to be removed from the start of the ID read
before the code conversion takes place. For instance a value of 3 applied to
A881C045 will result in 1C045 .
•
Code Remove Last:
Specifies the number of characters to be removed at the end of the ID read before
the code conversion takes place. For instance a value of 3 applied to
A881C045
will result in A881C .
•
Code Length:
Specifies the code length applied after the code conversion. For instance a value
of 6 applied to
A881C045 will result in A881C0 , whereas a value of 10 applied to
A881C045 will result in 00A881C045 .