UniFlow NTware MiCard, Инструкция по эксплуатации

Страница: 13 / 22

MiCard Magnetic Card Reader
1
1 Introduction
The MiCard Magnetic Card Reader allows a magnetic card identification on Canon
imageRUNNER devices.
With the MiCard Magnetic Card Reader it is possible to read out either track 1, 2 or 3
of magnetic stripe information and use the content of the read-out track for
identification.
2 Scope of Supply
The MiCard Magnetic Card Reader package includes:
•
The MiCard Magnetic Card Reader unit.
•
Pre-wired USB cable.
•
Installation Manual.
3 Requirements
Devices
•
MEAP enabled devices with USB interface
•
uniFLOW Login Manager / uniFLOW MEAP Client (Secure/Public Printing Applet)
V2.1.3 or higher
uniFLOW
•
uniFLOW/RPS V3.1.1 or higher
4 Connection
1.
Connect the MiCard Magnetic Card Reader to the USB Host Connection of the
MFP.
The power supply of the MiCard Magnetic Card Reader is provided via the USB
connection.
2.
A proper USB connection and a sufficient power supply of the MiCard Magnetic
Card Reader is indicated by a lighted LED and a beep.