Uniflex UA 4, Руководство по эксплуатации

Страница: 33 / 52

Maintenance
UNIFLEX-Hydraulik -
34 – www.uniflex.de
6 Maintenance
Deactivate the device before any maintenance work:
Figure 6-1 Main switch
Main switch, OFF position

Fully complete the crimping process.

Place the workpiece away from the device.

Stop the device by operating the main switch.
The device is deactivated.
Smooth operation of the device requires regular checks
of specific components.
This section describes activities to be performed by the
operator at regular intervals to ensure smooth operation
of the device.
If you work in 2 shifts, the check frequency
should be doubled. If you work in 3 shifts, proceed as
with 2-shift operation.