background image

OM-DEEP WELL REFRIGERATOR SERIES

POWER ON / OFF

MANUAL DEFROST

CHANGE SET POINT

Operation

POWER ON / OFF:

 Press and hold the power button until LED display turns On / Off

MANUAL DEFROST

: Press and hold “Defrost” Button

CHANGE SET POINT: 

 To raise temperature

1.  Press and hold “ ” to access set point. 

2.  When set point start flashing, Press “ ” to adjust set point

3.  After 30 seconds, the display automatically reverts to showing the current 

temperature 

CHANGE SET POINT: 

 To lower temperature

1.  Press and hold “v” to access set point

2.  When set point start flashing, Press “v” to adjust set point

3.  After 30 seconds, the display automatically reverts to showing the current 

temperature

CHANGE FROM 

º

F /

º

C : 

1.  Press the up/down buttons simultaneously for 5 seconds to access the menu.

2.  Password is requested. 

 Password is 000.

3.  Press the bottom left button to OK the password.

4.  Using the up/down buttons, navigate to the “diS” level.  Press the bottom left button 

to OK the selection.

5.  Using the up/down buttons, navigate to the “CFu” level.  Press the bottom left button 

to OK the selection.

a.  “-F” designates Fahrenheit.

b.  “-C” designates Celsius.

6.  Press the top left button repeatedly to return to exit and return to the home screen.

Содержание randell 4337DWR-290




















Отзывы: