Page 7 of 19
us
er
m
a
nu
a
l
P
ra
c
ti
c
e
.
user manual
Sy
st
e
m
s.
C
o
nt
ro
ls
.
Se
ns
o
rs
.
© by
TR
systems GmbH • 75179 Pforzheim •
• Tel.: (+49) (0)7231/3152 0
4
Technical data
design
PKM 02
display
2x pointer instrument 0-130% drag indicator
operating system
2x potentiometer 0-100% 2x reset-/2x testbutton
power supply
24V DC
power consumption
ca. 150W
temperature range
0-60°C
humidity
max. 95% non condensing
input impedance amplifier
1013 Ω
output signal analog
47 Ω / 0
-10V DC via M12 socket 5pin
output signal digital
NC contact max. 250V AC/1A
dimensions (WxHxD)
264.5x175.14x59.0mm
weight
ca. 2.3 kg
5
Introduction
The PKM 2000 is an analog press force measuring device with 2 channels.
The control and monitoring components installed in the device have been designed according to
state-of-the-art technology. The extension and compression of the press is measured by the piezo
sensors. The piezo sensors then convert the extension (compression), proportional to the force,
into an electric voltage. The maximum force occuring in any one cycle is saved to memory and
displayed and compared to the set value. If the set values are exceeded, the press is automatically
switched off. The values can be set to up to 130% of the press load as the tools often have an
asymmetric force distribution.
Please note: 100% for each side of the press is equal to 50% of the overall tonnage.
