manualshive.com logo in svg

Uniden XTRAK 80 Series, Руководство пользователя

Поделиться
Скачать
Uniden XTRAK 80 Series Скачать руководство пользователя страница 24

24

UNIDEN XTRAK

UHF CB Transceiver

Operation

Master Scan (Uninterrupted Transmit & Receive) 

Master Scan is a Transmit & Receive mode, using scan, that will allow continual comu-

nication across congested channels. 

Use Master Scan with other radios that are also set up to the same Master Scan set-

tings. Master Scan will not work on its own or if its settings are different from other 

radios using Master Scan.

The two settings all radios in your Master Scan network must share are;

 

- Scanning the same group of channels from the Group Scan (GS) memory

  

- Using the same CTCSS/DCS code

For your convenience, by default;

 

- Channels 09-20 are stored into GS Memory and

 

- CTCSS 01 is set as the Master Scan subcode. 

By scanning only group channels, radios in the network will be able to detect and re-

ceive group transmissions - continual communication without interruption. 

When transmitting in this mode, the radio switches to an unused group channel if it 

detects another signal with no CTCSS/DCS code, or the wrong code, on the channel 

last used by the group. In this way, all group users will be able to have continual com-

munication to or from other users.

The GS memory can be changed, channel by channel, if desired - but for Master Scan 

to work effectively each radio in the group must have the same channels in its GS 

memory. 

To add/remove channels from G.S SCAN Memory, refer to page 23.

NOTE

RX only Channels (CH22, CH23, CH61, CH62 and CH63), Emergency 

Channels (CH05, CH35), User Programmable RX Channels (CH81 to 

CH180) will not be included in Master Scan Mode even though stored 

into GS Memory. Also channels for which Duplex Setting is On will be 

skipped in Master Scan Mode.

XTRAK 80 OM_First Lot_print_r5.indd   24

XTRAK 80 OM_First Lot_print_r5.indd   24

4/06/2021   1:30:51 PM

4/06/2021   1:30:51 PM

Содержание XTRAK 80 Series





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды