manualshive.com logo in svg

Uniden XTRAK 80 Series, Руководство пользователя

Поделиться
Скачать
Uniden XTRAK 80 Series Скачать руководство пользователя страница 23

Operation

23

UNIDEN XTRAK

UHF CB Transceiver

Priority Watch for Group Scan

To switch Priority Watch On/Off;

1. Press 

[MENU] 

and then press 

[UP / DOWN]

 to highlight 

03 Priority Watch

.

2. Press 

[MENU] 

to select the option.

3. Press 

[UP / DOWN]

 to highlight On or Off.

4. Press and hold 

[MENU]

 to store the setting.

NOTE

If SCAN is deactivated while it is tuned to an active channel, the XTRAK 

will stay on that active channel. If none of the channels are active, the 

XTRAK will reinstate the scan start channel.

NOTE

If OS/GS Scanning is initiated when there are no channels programmed 

in OS/GS memory, an error tone will be heard and scanning will not start 

(see Add/Remove Channels from SCAN Memory, p.23).

Add/Remove Channels from SCAN Memory

Select OS/GS Scanning Mode. Select the channel you want to store.

Press and hold 

[MEM]

. The 

MEM

 icon appears and two beep tones sound.

To remove the channel from SCAN memory, press and hold 

[MEM]

 once more.

The 

MEM

 icon disappears.

XTRAK 80 OM_First Lot_print_r5.indd   23

XTRAK 80 OM_First Lot_print_r5.indd   23

4/06/2021   1:30:51 PM

4/06/2021   1:30:51 PM

Содержание XTRAK 80 Series





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды