6
1. When your phone accepts the Bluetooth connection, the XDECT
6135BTU sounds a confirmation tone. The Bluetooth device number
icon on the base and the handset display light up.
#
Most mobile phones automatically transfer the audio to a Bluetooth
device as soon as it pairs; if yours does not, look in your mobile
phone’s Bluetooth setup for a “transfer audio” or “send audio to
device” option.
To test the connection
1. Pick up the handset from the cradle.
2. Dial the number you want to call, then press
moBIle
on the handset.
You may not hear a dial tone or ringing, but the handset display says
Talk
.
3. Make sure the call connects and you can hear clearly. (When you’re
finished, press
end
to hang up.)
♦
The XDECT 6135BTU remembers the pairing information for your
mobile phone; if it loses connection with your phone for any reason
(e.g., the mobile phone travels out of range, runs out of charge,
etc.), the XDECT 6135BTU can automatically reconnect the next
time your phone becomes available.
Using the XDECT 6135BTU with four Bluetooth phones
♦
The XDECT 6135BTU can save the pairing information for four
different Bluetooth phones, but it can only use one mobile line at
any given time. For example, if you pair the XDECT 6135BTU to four
Bluetooth phones, when you press
moBIle
on the handset, the XDECT
6135BTU asks which phone you want to connect to.
♦
If you are using the XDECT 6135BTU to talk on one Bluetooth phone,
the XDECT 6135BTU will not ring if a call comes in on another phone.
♦
You can set a different ring tone for each paired mobile phone (see
page 10).
♦
To pair another Bluetooth phone, just repeat the pairing procedure
with the new phone. (If the paired phones interfere when you’re
pairing the new one, just turn off Bluetooth on any paired phones until
you finish pairing the new one.)
XDECT6135BTU.indd 6
21/02/12 1:07 PM
