29
Open folder to view files
Windows Media Player
Solving Problems
If you have any trouble with your system, try these simple steps first. If you still have a question,visit the
customer support page on our website; www.uniden.com.au for Australia or www.uniden.co.nz for New
Zealand.
If…
Try..
No Picture/Signal
Make sure all the connections are secure and properly connected
-
Make sure your monitor is plugged into a power source from the AC15V adapter on
-
the back of the monitor
Make sure there is nothing obstructing the view of the camera
-
Note: that the camera will not appear on screen until someone presses the doorbell
or you press the display button yourself
Try re-pairing the camera and monitor
-
If using batteries, ensure the batteries are not out of power
-
Picture to Bright/Dark
The night vision comes on automatically when the light levels drop; try the camera
-
in a pitch black setting. The area that the camera is in may get too much light to
activate the sensor
No Audio
Make sure the volume on the monitor is turned up and that nothing is interfering
-
with the speakers or microphone on the monitor, or the camera. Please note that
the volume cannot be adjusted while recording
If the doorbell is not playing, make sure nothing is interfering with the speaker and
-
try adjusting the melody volume to a higher level
Make sure whatever you are trying to hear is close enough to the microphone on
-
the camera/doorbell device
Disconnect and reconnect the wires from the camera and the monitor to make sure
-
they are secure
Try re-pairing the camera and monitor
-
Try pressing the talk button
-
Door Strike not
Functioning
Door not unlocking – make sure you have it wired to an electric door strike that will
-
operate with 15 VAC (door strike NOT included)
Make sure that all the connections are secure and properly connected
-
UWG700 OM.indd 29
28/9/11 9:42:01 AM
