18
Other Operations
View
To view and listen to the camera without speaking through it, press the del/view button. To close
the view screen select the view button again. The screen will stay on for one minute then shut off.
This feature is not available if camera is using batteries.
Record*
To prompt recording, make sure the screen is on and press the record button. The screen can be
turned on by someone ringing the doorbell, or by you pressing the talk or view button
.
For automatic
visitor recording see Record Setup, p.22. To review recordings see Event List and Playback, p.24.
*Requires optional SD card.
Open
To open the door, make sure the camera is connected to a compatible door strike (see connecting
an optional electronic door strike) and press (
OK
). This feature is not available if camera is using
batteries.
Volume
To turn the volume on/off and up, press (
Vol
). Each time you press the
button the volume will go up, until it reaches it highest level (6) then it will go back to 0 and
start over.
THE VOLUME IS NOT ADJUSTABLE WHILE RECORDING
To enter the Main menu
Press (
Menu
). If you are already in a menu press (
Exit
) to exit the menu you are in. Display turns off
after 1 minute idle time. System exits menu after 1 minute idle time.
Navigating through the Menu
To scroll through the main menu, select the side arrow button , pressing this will navigate
through the menu list. Once you have run through the list once, it will bring you back to the
beginning of the menu
To Select
To select anything on the main menu or sub menus press (
OK
)
To scroll through sub menus
Use the down arrow, the down arrow does not work to scroll through the main menu, only
submenus
UWG700 OM.indd 18
28/9/11 9:41:47 AM
