48
To access this option and to enable/disable DHCP:
1. If already in Network Configuration menu, use the
or
keys to
access DHCP option.
2. Press
SELECT
key.
3. Use the
or
keys to select enable/disable, and then press
SELECT
key.
• If “Enable” is selected, the message “Press
SELECT
to Restart” is displayed.
Press
SELECT
key, to restart the telephone. The LCD shows “Initializing...\”
and then “Searching DHCP Server...”.
• If “Disable” is selected, the message “Press
SELECT
to Restart” is displayed.
Press
SELECT
key to restart the telephone. The LCD shows “Initializing...\” is
displayed. The display returns to the date and time.
• If “Disable” is selected, user must make sure that the terminal IP address,
terminal net mask and default gateway address are manually configured with
correct values.
• If you do not want to restart the telephone, press
CANCEL/DEL
key (to return
to the previous menu) or
MENU
key to exit programming and return the
telephone to standby mode. If
LINE 1
,
LINE 2
,
SPEAKER/HEADSET
, or if the
handset is picked up, the telephone goes off-hook and the restart is cancelled.
• When telephone restart is cancelled, the new network settings are not
accepted until the telephone is restarted.
Terminal IP Address
This option is used to read or change the current terminal IP address value,
if the DHCP assignment has been disabled. If DHCP is enabled, an IP
address is assigned by the DHCP server when the telephone reinitializes.
Press Select to Restart
Network Config:
IP Address
2/6
DHCP
Disable
1/2
DHCP
Enable
2/2
Содержание UIP300G
Страница 1: ...UIP300G H 323 IP Phone Guide Administrator...
