Uniden UH8050S Скачать руководство пользователя

Страница: 45 / 56

UNIDEN UH8050S

UHF CB Transceiver

Operation - Special Features

SELCALL Settings
Tone Period

Tone period is the duration of one tone in a Selcall ID sequence. The setting of this

parameter depends on the type of application. On long distance communications, for

example: where the signal strength of the transmitted information is greatly reduced and

affected by noise, it is advisable to use a longer Tone Period. A long Tone Period gives

the decoder more time and information to check and evaluate the code.

NOTE

However, be sure that all the radios in your group use the same Tone

Period setting. Otherwise you will not be able to selectively call one

another.

The UH8050S allows you to select which Tone Period is best for you. The three most

commonly used tone settings (40,70 or 100 mSec) are available. With the freedom to

change this parameter, you can easily adapt to the existing system in your group

without the inconvenience of having the unit serviced by the dealer.
1. Power Off the UH8050S.
2. Press and hold

[POWER]

and

[MENU]

. The SELCALL Settings Menu will display (no

tone will sound).
3. Press

[MENU]

repeatedly to select the Tone Period setting - which is indicated on the

display as Pd.
4. Press

[SCAN]

to edit the setting. The current setting flashes.

5. Turn the Rotary Channel Selector to select the desired tone period from 40ms,

70ms or 100ms.
6. Press

[SCAN]

to exit the setting.

7. Press and hold

[ENTER]

, to save and exit programming mode.

Lead-in Delay

Lead-in delay is a Selcall transmission parameter that ‘wakes-up’ and helps the receiver

of the other radio to lock onto the incoming signal. Each time a Selcall ID is transmitted,

the Lead-in Delay attaches itself to the beginning of the code sequence and causes the

transmitter to be on for a longer period prior to the code transmission. This makes for a

stronger communication link between the transmitter and the other receiver.
One major advantage to having the longer Lead-in Delay is when selectively calling

another radio via a repeater station. A longer Lead-in Delay helps to stabilise both the

communication link from your radio to the repeater station and from the repeater station

to the other radio.

Содержание UH8050S

























































Результаты поиска

Содержание UH8050S

Отзывы:

Похожие инструкции для UH8050S

Бренды по названию

Популярные бренды

Uniden UH8050S, Руководство пользователя

Результаты поиска

Содержание UH8050S

Отзывы:

Похожие инструкции для UH8050S

Бренды по названию

Популярные бренды