UNIDEN Model UH400SX, UH400SX-RM, UH500SX, UH500SX-RM OM
24
Priority Watch
To switch Priority Watch On/Off;
1. Press
[MENU/ENTER]
two times. The Priority Watch setting
fl
ashes.
2. Turn the Rotary Channel Selector at the base or press
on the Remote SPK/MIC to
change the setting between ON or OFF.
3. Press
[MENU/ENTER]
to store the setting.
4. Press and hold
[MENU/ENTER]
to exit from the menu mode.
If SCAN is deactivated while it is tuned to an active channel, the UHF CB Radio
will stay on that active channel.
If none of the channels are active, the UHF CB Radio will reinstate the scan start
channel.
If OS/GS Scanning is initiated when there are no channels programmed in
OS/GS memory, an error tone will be heard and scanning will not start (see
Programming Scan Channels - below).
Add/Remove Channels from SCAN Memory
Select which Scanning Mode you wish to use
- OS or GS.
Select the channel you want to store.
Press to
[MEM]
store. MEM icon appears
and a short tone beep is heard.
To remove the channel from SCAN memory,
press
[MEM]
once more.
The MEM icon disappears.
Operation
uh400sx, uh500sx, uh400sx-RM, uhSec1:24 Sec1:24
uh400sx, uh500sx, uh400sx-RM, uhSec1:24 Sec1:24
1/2/08 1:31:28 PM
1/2/08 1:31:28 PM
