background image

23

Lithium-Polymer Battery Warning 

 

The receiver contains a non-removeable  
rechargeable lithium-polymer battery.

 

Do not try to charge the battery in temperatures 
below 0° C (32° F) or higher than 45° C (113° F )

 

Dispose of this equipment according to the 
instructions. 

 

Do not open the receiver or mutilate the battery. 

 

The rechargeable battery contained in this 
receiver may explode if disposed of in a fire.

 

Do not short-circuit the battery. 

 

Do not charge the rechargeable battery with any 
AC adapter other than the one provided. Using 
another adapter may damage the battery or 
cause the battery to explode. 

Rechargeable Batteries Must Be Recycled or 
Disposed of Properly.

Recycling and Disposal Information

 

Do not dispose of electronic devices or any of 
their components (especially batteries and LCD 
displays) in your municipal trash collection.

 

Consult your local waste management authority 
or a recycling organization like Earth911.com to 
find an electronics recycling facility in your area.

 

If you are unable to locate proper recycling 
facilities in your area, please return this product to 
Uniden for recycling.

FCC Compliance Information

Part 15 Compliance Statement

This device complies with Part 15 of the FCC 
Rules. Operation is subjected to the following two 
conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any 
interference received, including interference that 
may cause undesired operation.
This equipment has been tested and found to 
comply with limits for a Class B digital device, 
pursuant to Part 15 of the FCC rules and ETSI 
(EN) 300328. These limits are designed to 
provide reasonable protection against harmful 
interference in residential installations. This 
equipment generates, uses, and can radiate radio 

System Specifications Camera

Receiver

Power consumption

650 mA max

650 mA max

Low light solution

24 IR LEDs, 1 Low light sensor

Low light sensitivity

1-8 lux

Picture sensor

OV7725 1/4’ Color CMOS

Lens

F3.6mm H:53 V:40

Output Jacks

AV OUT : 3.5 mm headset jack to RCA
USB : USB 1.1 or above

Содержание UDW10055



























Отзывы: