Uniden UBCT-9, Руководство пользователя

Страница: 19 / 68

5
State Scanning
Press POLCE, FRE or AMBULANCE and the
scanner scans through police, fire or
Ambulance Frequencies and “SCAN” scrolls from
right to left in the display.
When in the State Scan mode, press
STATE and
the menu of states will appear.
Press POLCE.
The scanner will scan through Factory
Programmed Police Frequencies and
”POLCE”
appears in the display.
Press FRE.
The scanner will scan through Factory
Programmed Fire Frequencies and
”FRE”
appears in the display.
Press AMBULANCE. The scanner will scan
through Factory Programmed Ambulance
Frequencies,
”AMBULANCE” appears in the
display.
When the scanner finds a signal, scanning stops, the state code and the frequency
displays.
When the transmission ends, the two seconds delay feature (if you set on) holds the
scanner in that frequency for a response. If there is no response, scanning resumes. (See
Delay page 28).
Selecting the State
1. While State scanning, press STATE . The menu of
states will appear (See State Code Order Appendix:
page 56).
2. Press STATE and hold to scroll.
3. To step forward through the states (A-W), press STATE
and, within 3 seconds, press repeatedly.
4. To step backward through the states (W-A), press STATE
and, within 3 seconds, press repeatedly.
UBCT9 OM 15 12/11/07 3:53:33 PM