Uniden UBCD396XT, Руководство пользователя

Страница: 103 / 203

UBCD396XT
89
26. Tone Out mode
With the tone out feature, the scanner monitors up to 10 different channels for paging
tones (two-tone sequential, single tone, and group tone). Normally, the scanner
monitors each of the 10 channels in turn. However, if any tone-out channels share the
same frequency, modulator, and attenuator settings, the scanner checks these channels
simultaneously.
Configuring Tone Out channels
To configure Tone-Out channels:
1. Go to the Tone-Out for... menu.
2. Select
Tone-Out Setup
.
3. Select the Tone-Out channel (
Tone-Out 1
through
Tone-Out 10
) you want to
configure.
4. Select
Set Frequencies
and choose the frequencies for this channel
5. Select
Set Tone
and program Tone A and Tone B.
6. Set any of the other properties as you prefer (they aren't required).
Required
Frequencies ( Set Frequencies)
Tone A and Tone B ( Set Tones)
Recommended
Name ( Edit Name)
Optional
Automatic Gain Control ( Set Audio AGC)
Delay Time ( Set Delay Time)
Alert ( Set Alert)
Using Tone-Out Mode
To start a Tone-Out search:
1. Tap
MENU
.
2.
Scroll down and select
Tone-Out for...
3. Select
Tone-Out Standby
to start the search.

The scanner starts searching the most recently-used Tone-Out channel (and any
other Tone-Out Channels that have the same frequency).

If you want to search a different channel, just turn the
SELECT-VOLUME-
SCROLL
knob until you find the channel you want.