9
Three Power Options
- Use the supplied USB cable to
charge the UBC75XLT through your computer or other USB
charging port. You can also power the scanner using two AA
rechargeable Ni-MH batteries or optional alkaline batteries
(not included).
Key Confi rmation Tones
- the scanner sounds a tone when
you perform an operation correctly, and an error tone if you
make an error.
Battery Low Alert
- warns you when battery power gets
low. The Battery Low icon fl ashes (
) and a battery low
tone sounds every 15 seconds until the scanner is recharged,
turned off , or drained completely.
Battery Save
- works when there is no transmission for 1
minute in
Scan Hold
mode and in any
Search Hold
mode
(does not work in
Priority Scan
and
Close Call
modes). This
feature turns off RF power for 1 second and turns it on in
300ms intervals to extend the battery life.
Scan/Search Delay/Resume
- controls whether the scanner
pauses at the end of the transmission to wait for a reply. You
can set the Delay time for each
Channel
,
Close Call
,
Custom
Search
, and
Service Search
mode.
Step Frequency
- let you set your desired step frequency
during Quick Search, Custom Search, AIR Service Search, and
Close Call.
Modulation Type
- let you set your desired modulation type
(AM or FM) during Quick Search, Custom Search, CB Service
Search, HAM Service Search, Close Call, and each Channel.
UBC75XLT̲UB372BV̲20130401.indd 9
UBC75XLT̲UB372BV̲20130401.indd 9
2013/04/02 11:08:33
2013/04/02 11:08:33
