37
Scan the Stored Channels
Press
Scan
. The scanner scans through all non-locked out
channels in enabled banks. (See page 41 for more information
on locking out channels.) When the scanner fi nds a
transmission, it stops on it. When the transmission ends, the
scanner resumes scanning.
Notes:
•
If you have not stored frequencies into any channels, the
scanner does not scan.
•
If the scanner picks up unwanted partial or very weak
transmissions, press
Func
and press the scroll control knob.
SqL
displays. Turn the knob clockwise to decrease the
scanner’s sensitivity to these signals. To listen to a weak or
distant station, turn the knob counterclockwise.
•
Adjust squelch until the audio mutes.
Manually Select a Channel
You can continuously monitor a single channel without
scanning. This is useful if you hear an emergency broadcast
on a channel and do not want to miss any details - even
though there might be periods of silence - or if you want to
monitor a specifi c channel.
To manually select a channel when in
Scan
mode, press
Hold
,
enter the channel number, and press
Hold
again.The
scanner moves to the frequency stored in that channel.
During scanning, if the radio stops at a channel you want to
listen to, press
Hold
once. (Rotate the scroll control knob to
step through stored channels.) Press
Hold
again or
Scan
to
resume automatic scanning.
UBC75XLT̲UB372BV̲20130401.indd 37
UBC75XLT̲UB372BV̲20130401.indd 37
2013/04/02 11:08:36
2013/04/02 11:08:36
