36
3. Press
0
and then press
E
.
4.
The displayed frequency changes to all
0
s.
SCANNING
When you store frequencies into channels, those channels
are grouped into banks. Each bank contains 30 channels. You
can store service channels and non-service channels in the
same bank. For example, you can store a emergency, freenet,
marine, etc, together with utilities and other businesses.
There is no frequency range restriction per bank.
While you are scanning frequencies stored in the banks,
the word
SCAN
scrolls across the display. When it fi nds a
transmission, that frequency displays.
Enabling/Disabling Channel Banks
You can enable and disable each channel bank. When you
disable a bank, the scanner does not scan any of the 30
channels in that bank.
In
Scan
modes, press the number key that corresponds to
the bank you want to disable or enable. That bank number
displays at (or disappears from) the top of the screen,
showing the currently enabled banks.
The scanner scans all the channels within the displayed
banks that are not locked out. The bank number fl ashes
when the scanner scans a channel that belongs to that bank.
You can manually select any channel within a bank, even if
that bank is disabled. You cannot, however, disable all banks.
One bank must always be enabled.
UBC75XLT̲UB372BV̲20130401.indd 36
UBC75XLT̲UB372BV̲20130401.indd 36
2013/04/02 11:08:36
2013/04/02 11:08:36
