manualshive.com logo in svg

Uniden UBC3300XLT, Руководство пользователя, Страница: 82 / 100

Поделиться
Скачать
Uniden UBC3300XLT Скачать руководство пользователя страница 82

78

Mute On/Off

To manually turn ON the Mute function, press and hold 

MUTE

until 

MUTE ON

is displayed. 

You will not hear any audio. To turn it OFF, press and hold

MUTE

again.

Receiving Mode Selection

You can also set the receiving mode, AM or FM etc., in
Conventional mode or Chain Search mode.

See 

MODE

in "Menu Description" for details.

Frequency and Channel Tuning with the VFO
Control

The 

VFO

knob can be used for stepping through frequencies

or stepping through memory channels (for Conventional
channels or Talkgroup ID Scan Lists).

To switch the setting for the 

VFO

control, press and hold

HOLD/MAN

for 2 seconds. This will change modes from

Channel to Frequencies or Frequencies to Channels.

1. In Conventional mode, when the setting for the 

VFO

is

channel, rotate the 

VFO

to move up (to step up through

channels) or down (to step down through channels). If you
are in Trunk Manual mode, you will step through Scan List
memory locations.

2. In Chain Search mode, when the setting for the 

VFO

is

frequency, rotate the 

VFO

to move up to step up through

frequencies sequentially or to down to step down through
frequencies. To change the step, you will need to go into the
Chain Search menu and adjust the step for the desired
memory location.

UBC3300XLT OM  5/14/04  3:30 PM  Page 78

Содержание UBC3300XLT





































































































Отзывы:

Нет отзывов