Uniden UBC126AT, Руководство пользователя

Страница: 59 / 72

59
3. Scroll to
Scan Hits On or Off
and press
Pgm/E
to save and
return to the
Close Call
menu. (Default = Off)
You can also store these temporary frequencies into channel
storage banks when you receive them in
Scan
mode and scroll
to them in
Scan Hold
mode.
See also Storing Found Search Frequencies on page 51.
Close Call Delay
This setting controls how long the scanner stays on the
frequency after a transmission ends before resuming Close Call
operation. If you select a minus delay time, the scanner stops
on the transmission for the preset time and then automatically
resumes scanning. (Default = 2 seconds). This setting affects
both Search and Close Call.
1. Press
Func
then
Hold
to view the
Close Call
menu.
2. Scroll to
Set Delay
and press
Pgm/E
.
3. Scroll to select the delay time from following options:
• -10 sec - resumes after 10 seconds.
• -5 sec - resumes after 5 seconds.
• 0 sec - resumes immediately.
• 1 sec - waits 1 second for a reply then resumes.
• 2 sec - waits 2 seconds for a reply then resumes.
• 3 sec - waits 3 seconds for a reply then resumes.
• 4 sec - waits 4 seconds for a reply then resumes.
• 5 sec - waits 5 seconds for a reply then resumes.
4. Press
Pgm/E
to save and return to the
Close Call
menu.