48
•
To store a frequency, press
Pgm/E
; see Storing Found Search
Frequencies on page 51.
•
To temporarily lock out a frequency, press
l/O
.
•
To permanently lock out a frequency, press
l/O
twice quickly.
See also Search Options on page 49 for Delay, CTCSS/DCS
settings, Pager Screen and locking out/reviewing/unlocking
frequencies.
Quick Search Mode
Quick Search
mode allows you to enter a frequency and start
searching up or down from that frequency from any
Hold
mode
(except
Close Call Only
).
To start a Quick Search in
Scan
or
Search
mode, press
Hold
to hold on any channel or frequency. Enter the new frequency
(include a decimal point so you don’t go to a channel) and press
Hold
again to set the frequency.
At Quick Search, press
Hold
to start searching.
To start a Quick Search at the current frequency during Close
Call Search, turn
SCROll CONTROl
in
Hold
mode and press
Hold
to start searching.
When the scanner finds a transmission, it stops on it. When the
transmission ends, the scanner resumes searching according to
the delay setting.
While searching in
Quick Search
mode, the upper line
displays
Quick Search
and the lower line displays the
searching frequency and the direction indicator (
↑
or
↓
) with the
modulation.
Содержание UBC126AT
Страница 69: ...69...