- 37 -
If the strongest signal is muted, it displays in grey on the left side and the next
strongest signal displays in the main part of the display.
If only one signal is detected, the R8 display keeps the current Left Display setting.
K
24.158
GHz
2
mph
USER MARKS (LASER AND RADAR SITES)
With the R8, you can mark geographical points where you commonly encounter
radar transmissions, These can be school zones, red-light cameras, and places where
police frequently monitor traffic.
When you are at the location, press
MARK
. The R8 announces “User mark logged.”
Now, when you approach these points, the R8 announces “User mark ahead.”
If there is already a User Mark within a 1,666 ft (508m) radius, you cannot save
that specific location as a new User Mark.
Press and hold
MARK
at that location to delete that user mark.
The R8 registers up to 2,000 marks split between mute memory marks and user
marks. These marks are split at 1750 maximum and 250 minimum between the two
mark types.
USER SPEED LIMIT
When you set a speed limit thorough the menus, the R8 sends an alarm tone if your
speed exceeds that speed limit setting. If that happens, the unit announces and
displays over speed warnings.
MAINTENANCE
MAINTAINING THE EQUIPMENT
The R8 requires very little physical maintenance. Wipe it with a soft cloth to keep
dust from accumulating. Check the power cord connections to keep them clean and
free of corrosion.