- 36 -
450ft
30
mph
Mute
RED LIGHT CAMERA POINT DELETE
When you are at a red light camera and an alert displays, you can delete that camera
point. Once deleted, the R8 will not alert at that red light camera location again.
To delete the RLC Point, press
MUTE/DIM
on the unit or
MUTE
on the power cord
while the alert displays.
A confirmation message displays. Press
MUTE/DIM
on the unit again or
MUTE
again
on the power cord.
Delete Completed
displays.
THREATS
The R8 detects up to 4 radar band signals (threats) at a single time. The strongest
rader signal is designated as the Priority signal, and its frequency displays on the
OLED. Alert Display #3 also displays the second strongest signal on the OLED. The
other signals (threats) are indicated in the left side of the display. In the following
example, 2 K band, 1 Ka band, and 1 X band frequencies are detected. The multicolor
rectangles on the left side indicates signal strength.
K
24.158
GHz
Q-Ride
Ka
X
K
24.158
GHz
Q-Ride
K
Ka
X
K
Alert Display #1
Alert Display #2
K
Q-Ride
24.158
GHz
K
Q-Ride
24.051
GHz
Ka
X
Alert Display #3
If the frequency is muted, the signal strength display is gray.
The Priority menu setting determines which type of frequency displays on the OLED
(see page 18). If Priority is set to Signal priority, the strongest signal displays on the
OLED. If Priority is set to Ka Priority, the Ka band radar signal displays on the OLED.