Uniden R8, Руководство пользователя, Страница: 27 / 44

- 27 -
HOW DO I ...? TRY THIS...
Change the screen’s
brightness
Press and hold MUTE/DIM . The unit displays the
current brightness level. Press MUTE/DIM again.
The R8 announces the brightness level (Bright, Dim,
Dimmer, Dark, or Off) as it changes to that level.
Turn bands on and off Press MENU then + to cycle through the menu options
until the band you want to turn off displays. Press
MENU again to change that band’s status.
Change Highway to
City or Auto or set
attenuation levels in
Advanced mode and
back
Press MENU . The first menu selection is Highway
(default). Press MENU to cycle through
Highway
,
City
,
Auto
, and
Advanced
. After you select
Highway
,
City
,
or
Auto
, press and hold MENU to exit. If you select
Advanced
, press + to select the X, K, or Ka band to
adjust. Press MENU to adjust sensitivity levels in 10%
increments. Press + again to adjust the other mode.
Set a user mark Press MARK to create a user mark when you are at a
location where there is normally some type of radar.
The R8 announces “User mark logged.” The R8 will
announce when you approach user marks.
R8 stores 2000 points divided between Mute Memory
and User Mark locations.
Delete a user mark Press MARK again at that location to delete the user
mark.
R8 stores 2000 points divided between Mute Memory
and User Mark locations.
Delete ALL user marks Press and hold MARK to delete all user marks.
The R8 does NOT ask for confirmation before deleting
single user marks.
Allocate dynamic
memory points between
Mute Memory and User
Marks
Press
MENU
and
+
to scroll to the
Memory Quota
;
menu. Press
MENU
to select it and press
-
and
+
to
change the allocation in 50 point increments. See for
details.
Update the firmware and
database
Refer to www.unidensupport.com for details.