E-28
Uniden MHS135DSC Radio Owner’s Manual
nMea FeatUres
Your radio supports NMEA0183 Version 3.01, a standard for data communication
between marine instruments. If you are connected to a chartplotter and the radio
receives another boat’s position data (sentences) in a DSC call, the radio sends the
position data to the chartplotter so you can see the location.
NMEA sentences contain different sets of data. The MHS135DSC supports the following
sentences:
DATA
RMC
GLL
GNS
GGA
ZDA
UTC Time
O
O
O
O
O
Status (Valid/IInvalid)
O
O
O
O
X
Latitude/Longitude
O
O
O
O
X
Speed
O
X
X
X
X
Course
O
X
X
X
X
Date
O
X
X
X
O
The radio can output the following NMEA sentences:
GGA
GSV
DSC
GSA
RMC
DSE
To connect to a chartplotter:
1. Connect the RED wire to the NMEA positive (+) output.
2. Connect the BLACK wire to the NMEA ground.
3. Connect the YELLOW wire to the NMEA positive (+) input.
#
nOte: Use waterproof tape to seal electrical connections.
aDDitiOnal FeatUres
Using the Flashlight
You can use this radio in an emergency. If you press and hold
WX/SOS
, the radio turns
on the high-intensity LED flashlight on your radio. Depending on how you set it up, the
LED functions as a flashlight, flashes “S O S” in international Morse Code, is always on,
or is off.
RED - to NMEA (+) input
BLACK - to NMEA ground
YELLOW - to NMEA (+) output
