E-16
Uniden MHS135DSC Radio Owner’s Manual
arrow (
GPS/MEM
) to move the cursor to the next space. Press the left arrow (
WX/SOS
)
to back up.
When using the
CHANNEL UP
and
CHANNEL DOWN
keys to enter a name, the
alphabetic and numeric characters display in the following order:
x
Capital letters (A through Z)
x
Lower-case letters (a through z)
x
Punctuation (/ ‘ + -)
x
Numbers (0 through 9)
x
One blank space
Entering Your User MMSI Number
#
nOte: Be sure you have the correct User MMsi number before entering it in the radio.
the radio only allows you to enter the User MMsi once. if you need to re-enter the User
MMsi number, contact customer service (see back page for contact information).
1. When you power up your radio for the first time, it displays
MMSI Not Entered
and
then displays a marine mode screen. Press and hold
MENU/CALL
; the
Enter User
MMSI
screen displays.
2. Press
ENTER-H/M/L
. The
User MMSI
screen displays.
3. Enter the MMSI number as described previously to scroll through the numbers.
When the ninth digit is entered, the radio asks if you want to save the number and
confirm it. Press
ENTER-H/M/L
to save it.
4. Before saving the number, the radio displays the message
Confirm number! User
MMSI data is Permanent!
At this point you can edit the number (press
MENU/
CALL
), save the number (press
ENTER-H/M/L
), or return to the marine mode
screen (press
CLR/SCAN
),
Entering a group MMSI number
You can change the group MMSI number as often as you want. The first digit of a group
MMSI is fixed at “0.” Follow the steps below to enter a group MMSI number into the
radio:
1. Press and hold
MENU/CALL
to display the
Call
Menu.
2. Scroll to
DSC Setup
and press
ENTER-H/M/L
.The
DSC Setup
menu displays.
3. Scroll to
Group MMSI
and press
ENTER-H/M/L
. The
Group MMSI
screen displays.
4. Group MMSI numbers always start with a 0, so that digit is already entered for
you. Enter the MMSI number as described previously. When the ninth digit is
correct, press
ENTER-H/M/L
. The radio asks you to confirm.
5. To save this MMSI number, press
ENTER-H/M/L.
To cancel this MMSI number,
press
CLR/SCAN
.
0________
Use the up and down arrows
to adjust each of the eight
digits in turn.
16
Group MMSI
Back
[MENU]
Exit
[CLR]
Save
[ENT]
USA
DSC Setup
Press and hold
Group MMSI