E-20
Uniden MHS135DSC Radio Owner’s Manual
6. The radio automatically switches to channel 70 to transmit the call request.
x
When the other station accepts the call, both radios switch to the selected
response channel for voice transmission.
x
If the other station cannot respond on the channel you selected, the radio
displays
Not support CH
.
Calling a particular group of stations (Group Call)
Group calling calls all the stations that share your group MMSI. You must have a group
MMSI programmed into the radio to make a group call, and the stations (boats) you are
calling must have this same group MMSI programmed into their radios.
1. Press and hold
MENU/CALL
to display the
Call
menu.
2. Select
Group
.
3. The radio prompts you to select a response channel. Use
CHANNEL UP
and
CHANNEL DOWN
to scroll through the available channels. When you reach the
channel you want to use for a response, press
ENTER-H/M/L
.
4. The radio asks you to confirm the call. Select
Send
(press
ENTER-H/M/L
) to
continue with the call or select
Exit
(press
CLR/SCAN
) to cancel the call.
5. The radio switches to channel 70 to transmit the call request then automatically
switches to the designated response channel.
Calling all stations (All-Ships Call)
All ships calling contacts all DSC radios within range of your boat. You should only
use all ships calling in the event of a Safety warning (such as debris in the water) or
to request assistance in an Urgency (any situation where your vessel has a serious
problem but is not yet in distress).
1. Open the
Call
menu.
2. Select
All Ships
, and then choose whether this is an Urgency call or a Safety call.
3. The radio asks you to confirm the call. Select
Send
(press
ENTER-H/M/L)
to
continue with the call or select
Exit
(press
CLR/SCAN
) to cancel the call.
4. The radio automatically switches to channel 70 to transmit the call request then
automatically switches to channel 16, the designated response channel for all-
ships calling.
Making an aUtOMatiC Distress Call
If you have programmed your MMSI number, your radio can transmit an automated
distress call with your current location and nature of the distress. The radio then
monitors channel 16 for a response and repeats the distress call every few minutes until
it receives an acknowledgement.
to send an automatic distress call, press and hold Distress for three seconds. if no MMsi
number has been programmed, the radio prompts you to enter your MMsi number.
If you want to include the nature of your distress in the distress call, use the following
distress procedure:
1. Press
DISTRESS
.
2. The radio displays the list of distress conditions; use
CHANNEL UP
and
CHANNEL DOWN
to choose the nature of your distress, then press and hold
DISTRESS
for three seconds.
