[ 16 ]
G E T T I N G S T A R T E D
Mounting the Base Unit on a Wall
Setting the handset retainer clip for wall mounting
1) On the base unit, pull the handset retainer out of the
slot. Rotate it clockwise 180 degrees.
2) Flip the retainer from front to back. Slide it back into
the slot so that the lip of the retainer is up and the
oval is down. The retainer holds the handset in place.
Throughout this manual, terms such as Standby and Talk Mode are used. Below is the
terminology explanation.
Standby Mode
- The handset is not in use, is off the base, and
talk/call wait
has not been
pressed. A dial tone is not present and the display is blank.
Talk Mode
- The handset is not on the base and
talk/call wait
has been pressed enabling a
dial tone. “
Talk
” appears on the display.
Terminology
EXT1460 (ENG)-05/16 5/16/02 1:44 PM Page 16