“Distinctive Ringer” allows you to preset memory locations with a designated ring tone.
When an incoming call is received and the Caller ID information matches the information
in one of the memory locations, the Distinctive Ring that has been stored for that
particular caller will sound.
If you have set multiple memory locations with distinctive rings, switching the setting
to “
Distinctive Off
” will result in no distinctive ringing. All incoming calls will
have a normal ring tone. Switching to “
Distinctive On
” will activate all programmed
distinctive ring memory locations.
1) When the phone is in the standby mode, press
menu/mute
.
2) Press
-/
to move the pointer to “
Distinct. Ring
”,
then press
select/chan
.
3) Press
+
or
-/
to choose “
Distinctive On
” or
“
Distinctive Off
”.
4) Press
select/chan
and you will hear a confirmation tone.
B A S I C S
[ 25 ]
BASICS
Distinctive Ringer Setup
Adjusting the Earpiece Volume
The handset earpiece volume settings (Volume Low, Volume Medium, Volume High, and
Volume Maximum) can only be adjusted during a call. Press
+
or
-/
to select
the volume setting. When you hang up, the phone keeps the last volume setting selected.
If you press
+
in maximum volume level or
-/
in lowest volume level,
you will hear a beep.
See “Storing Phone
Numbers, Names.
Distinctive Rings,
and Speed Dial” on
page 30 for storing a
Distinctive Ring in
the Phonebook.
EXT1460 (ENG)-05/16 5/16/02 1:44 PM Page 25