Uniden EXA 3955 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 52

Uniden EXA 3955 Скачать руководство пользователя страница 43

[ 41 ]

A D D I T I O N A L I N F O R M A T I O N

Symptom

The

status

LED won’t light

when the handset is placed
in the base unit.

The audio sounds weak
and/or scratchy.

Can’t make or receive calls.

The handset doesn’t ring or
receive a page.

Severe noise interference

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.

Suggestion

• Make sure the AC adapter is plugged into the base unit and wall outlet.
• Make sure the handset is properly seated in the base unit.
• Make sure the charging contacts on the handset and base unit are clean.

• Press

during a call to help eliminate background noise.

• Make sure that the base unit antenna is in a vertical position.
• Move the handset and/or base unit to a different location away from metal objects

or appliances and try again.

• Make sure that you are not too far from the base.

• Check both ends of the base unit telephone line cord.
• Make sure the AC adapter is plugged into the base unit and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Reset the digital security code (See page 37).
• Make sure

is pressed.

• The battery pack may be weak. Charge the battery on the base unit for 15 - 20

hours.

• The handset may be too far away from the base unit.
• Place the base unit away from appliances or metal objects.
• Reset the digital security code (See page 37).

• Keep the handset away from microwave ovens, computers, remote control toys,

wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights,
and electrical appliances.

• Move to another location or turn off the source of interference.

talk

channel

ADDITIONAL

INFORMA

TION

EXA3955 newstyle 3.3 7/4/1 6:48 PM Page 41

«
...
41
42
43
44
45
...
»

Содержание EXA 3955





















































Отзывы:

Нет отзывов