7
When your phone accepts the Bluetooth connection, the Elite 9145
6.
sounds a confirmation tone. The Bluetooth device number icon on the
base and the handset display light up.
Most mobile phones automatically transfer the audio to a Bluetooth
#
device as soon as it pairs; if yours does not, look in your mobile
phone’s Bluetooth setup for a “transfer audio” or “send audio to
device” option.
To test the connection
Pick up the handset from the cradle.
1.
Dial the number you want to call, then press
2.
MOBIle
on the handset.
You may not hear a dial tone or ringing, but the handset display says
Talk
.
Make sure the call connects and you can hear clearly. (When you’re
3.
finished, press
eND
to hang up.)
The Elite 9145 remembers the pairing information for your mobile;
♦
if it loses connection with your phone for any reason (e.g., the
mobile phone travels out of range, runs out of charge, etc.), the
Elite 9145 can automatically reconnect the next time your phone
becomes available.
Using the Elite 9145 with four Bluetooth phones
The Elite 9145 can save the pairing information for four different
♦
Bluetooth phones, but it can only use one mobile line at any given
time. For example, if you pair the Elite 9145 to four Bluetooth phones,
when you press
MOBIle
on the station, the Elite 9145 asks which phone
you want to connect to.
If you are using the Elite 9145 to talk on one Bluetooth phone, the
♦
Elite 9145 will not ring if a call comes in on another phone.
You can set a different ring tone for each paired mobile phone (see
♦
page 16).
To pair another Bluetooth phone, just repeat the pairing procedure
♦
with the new phone. (If the paired phones interfere when you’re
pairing the new one, just turn off Bluetooth on any paired phones until
you finish pairing the new one.)
Elite9145om_20110115.indd 7
28/9/11 12:14:25 PM
