37
Registering Repeaters to the Base
If you are having trouble with a repeater or if you want to replace one,
you need to register the repeater to the base.
Connect the repeater close to the base for easy access to the
#
necessary buttons and indicators. Locate the repeater in the desired
position after registration is complete.
On the base, open the menu and select
1.
Register Accy.
On the back of the repeater
2.
you want to register, press and hold the
registration button until the
lINk
light on the front starts to blink (about
2 seconds).
Release the button and wait for the
3.
lINk
light to turn on and steady
(this can take about 90 seconds). The repeater has been registered to
the base.
If...
Try...
the
lINk
light
won't turn on
checking the repeater's AC adapter
x
connecting the adapter to a different outlet.
x
the
lINk
light
continues
flashing
disconnecting the unit's AC adapter. Wait about ten
x
seconds, then try again.
making sure there are not already 6 repeaters registered
x
to this base.
making sure no other base or repeater is in registration
x
mode.
Only register one repeater at a time. If more than one repeater is in
♦
registration mode at the same time then they can interfere with each
other.
Only register a repeater to one base at a time. If more than one base
♦
is in registration mode at the same time then you can't control which
base the repeater registers to.
If you want to register two or more repeaters to this base, just repeat
♦
these steps with the second repeater.
Elite9145om_20110115.indd 37
28/9/11 12:14:51 PM
