34
3.4.11 Training mode (Exit(softkey 4) key: exit from the Training mode)
When
Exit
key is pressed anytime during training mode, key touch-tone will be emitted and
“Training off” command is sent to the PBX Expansion board. The Handset will exit from the
Training mode.
3.5 REDIAL (Option)
When the RF link is established between the Handset and the Base Station and no dial key
operation is performed. If the user presses
redial
key, the last number dialed will be shown
and these dials will be sent to the Base Station.
<Notes>
1) Error tone will be emitted when redial is empty.
2) Dial limit is 32 digits, so redial will store up to 32 digits in memory.
3) Redial data is stored in Handset memory (EEPROM).
4) If
F1
-
F12
key is pressed the number dialed before Function key is pressed will be
stored in redial memory.
5)
redial
key is invalid when the Handset outputted dial. This means
redial
key is valid as
1
st
dial.
<Example>
(1) [talk][1][2][3][talk]
redial: 123
(2) [talk][1][2][3]……….[1][2][talk] (over 32digits) redial: 123……12 (up to 32digits)
(3) [talk][1][2][3][F1][4][5][6][talk] redial: 123
