22
3. Operation & Setup
In the following description, the key touch-tone will be emitted when a valid key is pressed.
3.1 Power Up
3.1.1 Handset
When the battery is put into the Handset, it will start operation.
At the very beginning, the Handset reads some setting from EEPROM and the Handset
starts operation.
Also the Handset reads ID from EEPROM and will use it for RF communication between it
and the Base Station.
3.1.2 Base Station
It will start operation after Install the AC adapter into rear of the Base Station.
At the very beginning, the Base Station reads ID from EEPROM and will use it for RF
communication between it and the Handset.
3.2 Power Down
3.2.1 Handset
If the Handset loses battery or the battery level decreases more than a threshold that is in
EEPROM, it goes to power down mode.
Even if the Handset power is reinstated immediately after it is lost during Talk mode, the
Handset will not return to Talk mode.
(DTL-8R-1 does not support talk back function.)
3.2.2 Base
Even if the Base power is reinstated immediately after it is lost during Talk mode, the
Handset will go Standby mode. (Not supports talk back function.)
