[ 12 ]
Most of the handset settings are set from the menu. The menu has 4 main menus
(
DirectLink Mode, Handset Setup, Global Setup, and System Reset
) and
submenus respectively.
Summary of the Main Menu and Submenu
Two Way Communication between the Handsets Anywhere without the
Base (DirectLink)
Select this menu to enter the handset into Directlink mode. If you have 2 or more
handsets, a pair of handsets work as transceivers. Use them at a shopping mall to stay
in contact with family and friends. To use this feature, you must set the two handsets
to the DirectLink mode first (see page 15).
ABOUT THE MENU
Handset Setup
All settings must be set separately for each handset in the Handset Setup menu.
This menu only applies when you have 2 or more handsets.
Submenu name
Description
Edit Voice Mail
Program or delete the voice mail access number (see page 15).
Ringer Volume
Adjust the ringer volume (see page 15).
Ringer Tones
Adjusting the ringer tone (see page 16).
Distinct. Ring
Set the distinctive ring (see page 16). “Distinctive Ring” allows you to
(Distinctive ring)
preset memory locations with a designated ring tone. When an incoming call
is received and the Caller ID information matches the information in one of
the memory locations, the distinctive ring that has been stored for that
particular Caller will sound.
If you have set multiple memory locations with distinctive rings,
switching the setting to “Distinctive Off” will result in no distinctive ringing.
All incoming calls will have a normal ring tone. Switching to “Distinctive On”
will activate all programmed distinctive ring memory locations.
For Global Setup and
System Reset
(Deregister HS)
menu, make sure the
line is not in use,
and the handsets are
within the range
limits of the base.
UP306BH (DSS2415) ENG OM 12/27/04 5:34 PM Page 12
