9
Wall mounting the range extender
Insert two #10 screws into the wall, 2¼ inches ( mm)
apart. Leave the heads of the screws about ¼ inch away
from the wall. (For best results, use a level to ensure the
screws are even.)
Remember to use appropriate anchors for the wall material.
Place the wall
mount holes
over the screw
heads and
slide the unit
down into
place.
To remove the unit from the wall, just slide it up and lift it off
the screw heads.
Compliance Information
Any changes or modifications to this product not expressly approved by
the manufacturer or other party responsible for compliance could void
your authority to operate this product.
FCC Part 15 information
This device complies with part 1 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Privacy of
communications may not be ensured when using this phone.
FCC PART 15.105(b)
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 1 of the FCC Rules.
1.
2.
Wall-mount
holes
Registration
button
Power connector
Wall-mount
holes
Registration
button
Power connector