38
Answering an Intercom Page
When.the.intercom.page.tone.sounds,.the.display.will.show.the.ID.of.the.handset.that.is.paging.
Press.
[ /Flash]
.or.
[Clear/Int’com]
..If.AutoTalk.is.on,.the.handset.will.automatically.answer.the.page.when.you.
pick.up.the.handset.from.the.cradle.
To.hang.up.an.intercom.call,.press.
[ ]
.
Muting the Ringer (One call only)
While.the.phone.is.ringing,.press.
[ ]
.to.mute.the.ringer.for.this.call..The.phone.will.ring.again.on.the.next.call.
Muting the Microphone
Mute.turns.off.the.microphone.so.the.caller.can’t.hear.you..This.only.works.while.you.are.on.a.call..
Press.
[ /Mute]
..MUTE.ON.and. .appear.in.the.display;. .remains.while.muting.is.on.
To.cancel.muting,.press.
[ /Mute]
.again..MUTE.OFF.appears.
Seven-Digit Dialing
In.some.areas,.the.telephone.company.may.allow.you.to.place.a.local.call.by.dialing.only.seven.digits.(instead.of.
ten)..If.this.is.the.case.in.your.area,.you.can.program.your.local.area.code.in.your.phone..Programming.your.area.
code.will.allow.you.to.see.the.caller’s.seven-digit.phone.number.which.will.allow.you.to.easily.return.the.local.call.
without.modifying.the.number.before.dialing..If.you.get.a.call.from.outside.your.area.code,.you.will.see.all.ten.digits.
To.program.your.local.area.code:
Press.
[Menu/Select]
..Select.the.GLOBAL.SETUP.menu,.and.then.the.AREA.CODE.submenu.
Use.the.number.keypad.(
[0]
.through.
[9]
).to.enter.a.three-digit.area.code..If.an.area.code.has.already.been.
stored,.it.appears.in.the.display..Press.
[Clear/Int’com]
..to.delete.the.stored.code,.and.then.enter.a.new.one.
Press.
[Menu/Select]
. You will hear a confirmation tone.
Note:.. If.you.have.multiple.bases,.select.the.base.before.programming.the.area.code.(see.page.2).
)
2)
)
2)
)
2)
3)