35
Adjusting the Audio Tone
If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on
a.call..Your.phone.gives.you.three.audio.tone.options:.low,.natural.and.high;.the.default.setting,.Natural.Tone,.is.
recommended.for.hearing.aid.users..Audio.tone.adjustments.only.apply.to.the.earpiece,.not.the.speakerphone.
To.adjust.the.audio.tone:
While.on.a.call,.press.
[Menu/Select]
.
Move.the.cursor.to.select.AUDIO.TONE,.and.then.press.
[Menu/Select]
.
Move.the.cursor.to.select.desired.option.(HIGH.TONE,.NATURAL.TONE,.or.LOW.TONE),.and.then.press.
[Menu/Select]
..Selected.option.appears.in.the.display.for.two.seconds,.and.then.the.display.returns.to.normal.
Finding a Lost Handset
To.locate.a.misplaced.handset,.press.
[find hs]
.on.the.base.when.the.phone.is.in.standby..The.handsets.connected.
to.the.paging.base.will.beep.for.one.minute,.and.PAGING.appears.on.the.handset.display..To.cancel.paging,.press.
[find hs]
.again.or.any.key.on.the.found.handset.
Note:.. Handsets.that.are.not.currently.connected.to.this.base.will.not.be.paged.
Using Hold, Conference and Transfer
Placing a Call on Hold
During.a.call,.press.
[Clear/Int’com]
.on.the.handset.to.place.the.caller.on.hold..If.you.leave.a.caller.on.hold.for.
more.than.ten.seconds,.the.display.screen.will.read,.Line.On.Hold.
To.return.to.the.party.on.hold,.press.
[ /Flash]
.or.
[
]
.on.a.handset..The.phone.will.return.to.the.holding.party.
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be
disconnected.and.the.phone.will.return.to.standby.
.
•.While.a.call.is.on.hold,.Caller.ID.and.Call.Waiting.cannot.be.received.
)
2)
3)
)
2)